Wednesday, December 28, 2011

The Guardian

Do you know what it's like to see one of your charges murdered? Yes, you can try to imagine, but really, it's not possible.

I know.

I've seen.

I could see the grotesque plans forming in his mind as he assured her that his childish behaviour was now a thing of the past and that he would like to invite her to his house to watch the peculiar picture box humans seem to take so much pleasure in viewing.

I tried desperately to signal his hideous intensions to her, but alas, without success.

I felt each stab of the knife, each puncture the blade made in her skin. I watched her writhe in excruciating agony on the shabby lino floor. I saw the life drain from her features while a fire tore through my body in response. Every one of my appendages seemed to be wrapped in barbed wire.

The teardrops that cascaded down my cheeks burned like acid. I wept not only because of the pain we both felt, but also due to my failure to protect the delicate, fragile young human who'd called on me.

The hatred I felt towards the young male took shape inside me, and it began to transform my physical appearance.

My flowing hair, previously the colour of flame, darkened to a dull ash colour and the strands became lank. My halo was coated in a blood-coloured rust, now more similar to a bloody headband than a golden ring.

A black ink seeped through my dove-like wings, turning them pitch, and suddenly they were riddled with gaping, ragged holes. Nails and teeth elongated and sharpened until they resembled shards of broken glass, able to tear through mortal flesh with ease.

I threw myself at him, relishing the look in his eyes. His sadistic grin fell away, to be replaced with sheer horror.

I felt my talons dig into his eyes, my snapping jaws catching a hunk of flesh on his cheek. Several bones snapped as powerful feathered limbs made contact with his ribs, arms and legs. I delighted in his screams, his pitiful cries for help and mercy.

His thrashing limbs first weakened, then stopped completely. I beheld the life source abandoning his body, and revelled in it.

I prowled around the house, waiting for the arrival of the human peace-keepers. When they came two days later, I made certain the human boy would be buried in a murderer's grave - arranging everything in the house just so. I even requested the help of a pack of wild canines, who were more than glad to help. For their troubles, I granted them permission to each take a small part of him.

It was concluded that these dogs had attacked and killed the boy.

As a last gesture of devotion to my human, I scooped her essence from her body, and carried her to her final place of rest, where she is at last at peace.

(This story is credited to a person called VendettaVixen.)

56 comments:

  1. ^ Weddings. Scariest thing ever.

    ReplyDelete
  2. I hope the Angel of Death is there to protect me from getting married!

    ReplyDelete
  3. better than twilight

    ReplyDelete
  4. Thanks for shared this with us. I found out this educational and fascinating weblog so i think so its really very helpful and know-how able.

    ReplyDelete
  5. chilling. i like this a lot

    ReplyDelete
  6. Why do u keep posting this on every story

    ReplyDelete
  7. I pooped my pants

    ReplyDelete
  8. Pinksprinkleddoughnuts.September 16, 2012 at 11:58 AM

    This is more beautiful then creepy. Honestly.

    ReplyDelete
  9. Have you actually been Ripped off on Runescape? - Which means, possibly you might have been cheated? Very well, for anyone who is like most individuals than your reply is probably certainly to that concern. Properly don't allow for it happen as soon as extra! Here are some tricks, that may assist you to stay away from becoming scammed.

    ReplyDelete
  10. using either motor [url=http://www.icarbonsports.com/products/carbon-bike-frame-fork/carbon-road-bike-frames/]carbon road frames[/url]the tube by depressing the valve ICAbike01 stem with the hooked end of your tire lever. There are two main types of valve stems, a schrader valve and a presta valve. This tutorial is based on a schrader valve, but I will be covering the different valve types in another tutorial.
    Now it’s time to remove your tire, one side at a time. Choose a section of tire that is away from the valve and hook one of the tire levers under the bead, directly in line with one of your spokes. Pry one side of the tire bead over the edge of the rim, and then hook the end of the tire lever to the nearest spoke. Insert another tire lever two spokes away from the first, and a third another two spokes away. Now the middle lever should fall out, and you can continue the process. When the tire is loose enough you can just run a tire lever around the rest of the rim to pull the whole side over.
    After you have removed one side of the tire, the[url=http://www.icarbonsports.com/]carbon fibre bike frames[/url]
    ow remove the tube from the tire, and try to keep track of where it was positioned in relation to the tire. Inflate the tube to approximately twice its original size. This will expand the hole making it easier to find.
    Listen carefully to the entire circumference of[url=http://www.icarbonsports.com/products/carbon-bike-frame-fork/]china carbon frames[/url]the tube; you should hear a hissing sound that will indicate where the leak is. As a last resort you can submerge the tube in water and watch for bubbles, but you’ll want to avoid doing this as you’ll need the tube to be completely dry in order for the patch glue to work.
    Once you’ve found the leak, take note of whetherICAbike01 it is on the inner or outer side of the tube.
    I don’t recommend using either motor oil or 3in1 oil to lubricate the chain. Motor oil is too heavy and won’t fully penetrate the rollers, and 3in1 oil is vegetable based and will gum up the chain. I also don’t recommend using wax lubricants because while they don’t collect as much dirt, they are a lot of hassle to apply correctly, and wax is simply not as good a lubricant as oil. I do recommend mineral based chain oils like Finish Line Cross Country or Phil Wood Tenacious Oil because they do the best job of fighting corrosion and don’t wash away when they get wet.
    Chain Cleaning
    For cleaning, first shift the chain into [url=http://www.icarbonsports.com/]zipp 404[/url]the smallest sprocket on the rear. For average dust and dirt, wipe the chain clean with a solvent soaked rag. The easiest way to do this is to hold the chain still at the rear derailleur cage while firmly wiping the lower run of the chain. Then move the chain backward and wipe again until you’ve wiped the entire length of chain. Wipe between the rear sprockets using either a rag or a sprocket cleaning tool. Then clean all of the front chainrings on both sides.
    Shift your gears into the middle sprocket both front and rear. Remember that oil does a good job of spreading itself, so try not to over-apply the lubricant. Lubricate the inner circumference of the chain, on the side that faces the sprockets along the top of the lower run of the chain. Run the chain backwards while dropping oil down both sides of the rollers.
    Shift through all of the gears to spread the lubricant evenly through the drivetrain. Then use a rag to wipe off any excess oil.

    ReplyDelete
  11. If it is not shattered. windows 7 professional key typically acquired favorable critiques when it was published. A few years right after their '09 start, right now there nonetheless have not been a great deal of issues. You will find many cheap windows 8 key pleased with Glass windows 7 and in many cases Microsoft windows had been, there's no persuasive reason to modify in order to Glass windows 8.

    ReplyDelete
  12. Required Tools A patch kit (a few different patch sizes, carbon road framessandpaper or a metal scraper, and a tube of glue), a set of tire levers, and an air pump.
    Inspect Tire
    With the wheel removed from your bike, inspect the outer ICAbike01 surface of the tire to make sure there are no sharp objects like a thumb-tack or thorn stuck in the tread.
    Remove Tir
    Remove the valve cap and fully deflate thetube by depressing the valve stem with the hooked end of your tire lever. There are two main types of valve stems, a schrader valve and a presta valve. This tutorial is based on a schrader valve, but I will be covering the different valve types in another tutorial.
    Now it’s time to remove your tire, one carbon fibre bike framesside at a time. Choose a section of tire that is away from the valve and hook one of the tire levers under the bead, directly in line with one of your spokes. Pry one side of the tire bead over the edge of the rim, and then hook the end of the tire lever to the nearest spoke. Insert another tire lever two spokes away from the first, and a third another two spokes away. Now the middle lever should fall out, and you can continue the process. When the tire is loose enough you can just run a tire lever around the rest of the rim to pull the whole side over.
    After you have removed one side of the tire, the other side should come off very easily.
    Inspect Tube
    Now remove the tube from the tire, and try to keep track of where it was positioned in relation to the tire. Inflate the tube to approximately twice its original size. This will expand the hole making it easier to find.
    Listen carefully to the entire circumference china carbon framesof the tube; you should hear a hissing sound that will indicate where the leak is. As a last resort you can submerge the tube in water and watch for bubbles, but you’ll want to avoid doing this as you’ll need the tube to be completely dry in order for the patch glue to work.
    Once you’ve found the leak, take note of whether it is on the inner or outer side of the tube.
    If the hole was on the outer side of the tube, inspect the inner surface of the tire in that spot to make sure the object that caused the puncture is not still stuck in the tire. Double check the entire inner side of the tire by running your fingers along the entire surface, feeling for obstacles along the way.
    If the hole was on the inner side of the tube, zipp 404inspect your entire rim to make sure there are no sharp burrs in the metal, and that the rim tape is properly protecting the tube from your spoke ends.
    Now that the rim and tire are clear, it’s time to patch the tube. Select an appropriate sized patch for the hole. Use the sandpaper or scraper provided in your kit to buff the surface of the tube for an area a bit larger than the patch. You need to buff the tube so that it is no longer shiny. If the molding line is running along the area where the patch is to be applied, you must sand it down completely, or it will provide an air channel. Once buffed, avoid touching that area with your fingers.
    Apply a dab of rubber cement, and then spread it into a thin coat, using your cleanest finger. Work quickly. You want a thin, smooth coat of cement; if you keep fiddling with it as it begins to dry, you’ll risk making it lumpy. The thinner the cement, the faster it will dry. It is very important to allow the cement to dry completely.
    Peel the foil from the patch and press the patch onto the tube firmly, squeezing the patch tightly onto the tube.

    ReplyDelete
  13. The attempts at poetic language were kinda dull and the imagery was... hackneyed and way too long. The writing and plot just read like an 8th grader attempting to sound emotionally deep. This wasn't even scary at all, I wouldn't have known this was supposed to be horror if it wasn't posted here (is it even horror?). I think the author has good potential to improve and should continue writing, but should practice being more original in their concepts and language.

    ReplyDelete
  14. Thank you for sharing this post. It is a great post, I am really impressed by your post. It’s really useful Feel free to visit my website; 일본야동

    ReplyDelete
  15. Excellent post. I was reviewing this blog continuously, and I am impressed! Extremely helpful information especially this page. Thank you and good luck 안전놀이터

    ReplyDelete
  16. nice article if u looking for real-time fun best evening desert safari dubai and great tour packages at an affordable rate then u contact the company. This is a great article thanks for sharing this informative information. I will visit your blog regularly for some latest post. I will visit your blog regularly for Some latest post. Awesome blog. I enjoyed reading your articles. This is truly a great read for me. I have bookmarked it and I am looking forward to reading new articles. Keep up the good work! Thanks for the valuable information and insights you have so provided here.. 슈어맨

    ReplyDelete
  17. Positive site, where did u come up with the information on this posting?I have read a few of the articles on your website now, and I really like your style. Thanks a million and please keep up the effective work. I definitely enjoying every little bit of it. It is a great website and nice share. I want to thank you. Good job! You guys do a great blog, and have some great contents. Keep up the good work. This is a great inspiring article.I am pretty much pleased with your good work.You put really very helpful information. Keep it up. Keep blogging. Looking to reading your next post. 온카맨

    ReplyDelete
  18. Excellent information on your blog, thank you for taking the time to share with us. Amazing insight you have on this, it's nice to find a website that details so much information about different artists. On this subject internet page, you'll see my best information, be sure to look over this level of detail. Great post i must say and thanks for the information. Education is definitely a sticky subject. However, is still among the leading topics of our time. I appreciate your post and look forward to more 모두의토토

    ReplyDelete
  19. I recently found many useful information in your website especially this blog page. Among the lots of comments on your articles. Thanks for sharing..I am happy to find this post very useful for me, as it contains lot of information. I always prefer to read the quality content and this thing I found in you post. Thanks for sharing 온카맨

    ReplyDelete
  20. I am sure they will be benefited from this website. 카지노사이트

    ReplyDelete
  21. I was able to think a lot while looking at this post. I will pass this blog to many people. 카지노사이트

    ReplyDelete
  22. เกมสล็อตออนไลน์ PG เกมสล็อตเเตกง่ายล่าสุด 2022 ที่พึ่งอัพเดทจาก PG SOFT สล็อต Jungle Delight เกมสล็อตป่าแห่งมิติ เกมสล็อตออนไลน์ที่มาพร้อมกับเงินรางวัลก้อนโต ลุ้นรับผลกำไรทุกครั้งที่มีการหมุนสปิน เล่นง่ายได้เงินไวอย่างแน่นอน ลุ้นรับเงินรางวัลผลตอบเเทนก้อนโตทุกครั้งที่มีการหมุนสปิน สล็อตเบท 1 บาท งบน้อยก็เล่นได้ ทำกำไรได้ด้วยตัวเอง เดิมพัน Jungle Delight ได้แล้วที่ Ambbet.

    ReplyDelete
  23. 이것은 확실히 제 작업에 도움이됩니다. Lol, 귀하의 의견에 감사드립니다! 도움이되었다 니 다행입니다 주소모음

    ReplyDelete
  24. You can not imagine just how much time I had spent for this info!

    ReplyDelete
  25. Great blog! Is your theme custom made or did you download it from somewhere?

    ReplyDelete
  26. A theme like yours with a few simple adjustements would really make my blog jump out.

    ReplyDelete
  27. Please let me know where you got your design. Thanks a lot

    ReplyDelete
  28. I know my audience would appreciate your work.

    ReplyDelete
  29. Wonderful web site. Plenty of useful info here.

    ReplyDelete
  30. I was surprised, I have to say. Equally.

    ReplyDelete
  31. Hi there, after reading this remarkable paragraph i am too happy to share my experience here with friends.

    ReplyDelete
  32. I’m looking for a lot of data on this topic. Thank you!

    ReplyDelete
  33. Veryy well-written. I am really thankful for sharing your quality words with us.

    ReplyDelete
  34. I like the efforts you have put in this, thanks for all the great posts.

    ReplyDelete
  35. I love the efforts you have put in this, appreciate it for all the great content.

    ReplyDelete
  36. I gotta favorite this website it seems very beneficial extremely helpful

    ReplyDelete
  37. Hi! This is my first visit to your blog!

    ReplyDelete
  38. information to work on. You have done a outstanding job!

    ReplyDelete
  39. I will be sure to bookmark your blog and definitely will come back sometime soon.

    ReplyDelete
  40. Thanks for ones marvelous posting! I certainly enjoyed reading it.

    ReplyDelete
  41. I have bookmarked it in my google bookmarks to visit then. Feel free to visit my website;

    ReplyDelete
  42. thank you again for allowing me to read these posts, and have a nice day today. Thank youuu.

    ReplyDelete
  43. this is very appealing, however , it is very important that will mouse click on the connection:

    ReplyDelete

  44. Interesting! I was thinking the same thing as you. Your article explains my vague thoughts very clearly

    ReplyDelete
  45. Thank you. I have a lot of interesting ideas. I want you to look at the post I wrote

    ReplyDelete
  46. Such an amazing and helpful post. I really really love it

    ReplyDelete